WinLink™ 1000 User Manual Release 1.9 8-1
Chapter 8
Site Configuration
The Site Configuration dialog panels are used to configure parameters,
which may differ between both sides of the link.
The parameters configured using the Site Configuration dialog panels
include (among others):
• System settings
• Air interface - Transmit (Tx) powerHub Site Synchronization status
• Network management including VLAN
• Inventory - link hardware and software model details
• Security settings
• Date and time
• Ethernet service settings
• TDM Hot Standby status
• External alarms settings
• Operations - Revert to factory settings
The Operations dialog offers a “doorway” to jump into installation mode.
The Site Configuration dialog has its own main menu with the following
extra functionality:
• Backup configuration parameters
• Restore configuration from a previously backed up configuration file
• Refresh the current panel
• Enable/disable the site ODU buzzer
• Jump back into installation mode keeping current configuration set-
tings
Configuring the Site
Editing the Configuration Parameters by Site
You can edit the configuration parameters for each site individually. The fol-
lowing functions are available from the left side of the dialog box.
To Next Page
Loading...
