WinLink™ 1000 User Manual Release 1.9 K-1
Appendix K
Monitored Hot Standby
Installation Procedure
What is a RADWIN Monitored Hot Standby
The RADWIN Monitored Hot Standby (MHS a.k.a 1+1) is a duplicated link
set up as a primary link and a secondary link in hot standby mode as shown
in Figure K-1 below.
Figure K-1: RADWIN Monitored Hot Standby
RADWIN MHS provides redundancy and backup to TDM services. It is
designed to provide high reliability high-capacity Point-to-Point links. The
RADWIN MHS is -
To Next Page
Loading...
