Radwin WinLink 1000 Series User Manual

BRS Link Activation Appendix I
WinLink™ 1000 User Manual Release 1.9 I-2
Figure I-2: BRS Air Interface dialog box
4. Set the appropriate Frequency Band Plan and Bandwidth.
5. Select the required frequency band, and click Apply.
6. Click Installation Mode
7. Repeat for the remote ODU.
Figure I-3: BRS Channel Settings Pre-Transition
8. Perform the remainder of the Installation procedure as defined in the
Installation section.

Radwin WinLink 1000 Series Specifications

General

Brand	Radwin
Model	WinLink 1000 Series
Category	Network Hardware
Language	English