Radwin WinLink 1000 Series User Manual

The procedure Appendix E
WinLink™ 1000 User Manual Release 1.9 E-3
Figure E-2: Opening RADWIN Manager window prior to band change
(default circled)
7. Click Tools | Change Band. The following window appears:
Figure E-3: Change Band dialog
8. Click the band required:
Note
The bands appearing in Figure E-3 are product dependent. To see which
bands are available for your product, check your product Inventory (see
Figure 8-7) and then consult RADWIN Customer Support.

Radwin WinLink 1000 Series Specifications

General

Brand	Radwin
Model	WinLink 1000 Series
Category	Network Hardware
Language	English