The procedure Appendix E
WinLink™ 1000 User Manual Release 1.9 E-2
¾ To change the factory default band:
1. Using the IDU-ODU cable, connect the PoE device to the ODU, ensuring
that the cable is plugged into the PoE port marked P-LAN-OUT.
2. Connect the Poe device to AC power.
3. Using a crossed LAN cable, connect the LAN-IN port of the PoE device to
the Ethernet port of the managing computer. The ODU will commence
beeping at about once per second, indicating correct operation.
4. Launch the RADWIN Manager.
5. Log on as Installer.
Figure E-1: Becoming Installer
6. Enter the default password,
wireless
. After a few moments, the RAD-
WIN Manager main window appears:
To Next Page
Loading...
