WinLink™ 1000 User Manual Release 1.9 F-1
Appendix F
Software Upgrade
What is the Software Upgrade Utility?
The RADWIN Manager provides a Software Upgrade Utility (SWU) to
upgrade the software (firmware) of installed ODUs in a network. The
update files may be located anywhere accessible by the operator.
The SWU provides for prior backup of the current files prior to upgrade.
The default location of the software files is in the installation area, and can
be used to restore factory defaults.
Upgrading an Installed Link
¾
To upgrade software for a link:
1. In the RADWIN Manager main menu, click Tools | Software Upgrade
... The following detached window appears
Figure F-1: Software Upgrade Utility - Main window
Note
The following procedure is generic to all RADWIN radio products. What you
see on your running RADWIN Manager may differ in some details from the
screen captures used to illustrate this Appendix.
To Next Page
Loading...
