HSS Link Configuration Appendix H
WinLink™ 1000 User Manual Release 1.9 H-6
The performance of WinLink™ 1000 radios that operate with this RFP can
be seen in the Link Budget Calculator when selecting RFP type E.
The following list summarizes the effect of 1250 milliseconds RFP on Win-
Link™ 1000 radios. These effects should be considered in when planning
new installations.
• Only Channel Bandwidths 20 and 10 MHz are supported
• For products supporting a maximum throughput of 18.1 Mbps, the
maximum Ethernet throughput is 14.5 Mbps at the 20 MHz channel
and 9.3 Mbps at the 10 MHz channel
• The 5 MHz Channel Bandwidth is supported only in WinLink™ 1000-
ACCESS products
• For products supporting maximum throughput of 21.4 Mbps, the
maximum Ethernet throughput is 22.5 Mbps at the 20 MHz channel
and 9.3 Mbps at the 10 MHz channel
HSS Link Configuration
For HSS-enabled units, the Hub Site Synchronization Settings dialog box
appears in the Link Configuration Wizard.
Figure H-6: Hub Site Synchronization Settings dialog box
The Synchronization Status dialog box displays the current status of each
side of the link.
• Operation: Type of unit
• Hub Sync Master (HSM)
• Hub Sync Client - Disable Transmission (HSC-DT)
To Next Page
Loading...
Need help?
General
