Changing the Log-On Password Chapter 4
WinLink™ 1000 User Manual Release 1.9 4-8
Changing the Log-On Password
¾ To change the log on password:
1. From the Tools menu, select Change Password.
The Change Password dialog box appears.
2. Enter the current password, and the new password.
3. Click OK to confirm.
First steps
At this point the main window of the RADWIN Manager should be displayed:
Tools
Software
Upgrade
Upgrades the ODU firmware in selected links Appendix F
Spectrum View Not available for WinLink™ 1000
Change
Password
Change the log-on password page 4-8
Events Log
Clear Events Clear local events log
page 9-16
Save to File Save events log data to a file
Preferences Set managing computer preferences
Help
RADWIN
Manager Help
View online help version of the User Manual
Link Budget
Calculator
Calculator opened in default browser Appendix B
Get Diagnostics
Information
Obtain system information page 9-1
About RADWIN
Manager
RADWIN Manager build information
Note
For what follows, it is assumed that you have set the IP addresses of both
ODUs. For the purposes of illustration, we will use the following IP
addresses:
Our managing computer has its NIC set to IP address 192.168.2.100. The
log-on ODU is set to IP address 192.168.2.101 and the over-the-air ODU is
set to 192.168.2.102. The Subnet Mask for both sites is 255.255.255.0 and
the Default Gateway is left unset. We will maintain this arrangement
throughout the remainder of this manual.
Table 4-3: RADWIN Manager: Offline Functionality (Continued)
Menu level
Function Reference
Top +1 +2
To Next Page
Loading...
