R&S FSPN - R&S Support Information; Service Functions

General Instrument Setup
R&S
®
FSPN
236User Manual 1179.4363.02 ─ 01
Number block behavior
Defines the default behavior of the keypad on the front panel of the R&S FSPN for text
input. Depending on the type of values you most frequently enter using the keypad, a
different default is useful.
"123"
Numeric values are entered when you press a key on the keypad.
To enter alphanumeric values, use an external or the on-screen key-
board, or switch this setting.
"ABC"
(Default)
Every key on the keypad represents several characters and one num-
ber. If you press the key multiple times in quick succession, you tog-
gle through the symbols assigned to the key. For the assignment,
refer to Table 3-8.
9.5 Service Functions
Access: [Setup] > "Service"
When unexpected problems arise with the R&S FSPN some service functions may
help you solve them.
For more helpful information for support, see also Chapter 12.1, "Collecting Information
for Support", on page 528
● R&S Support Information...................................................................................... 236
● Self-test Settings and Results...............................................................................237
● Calibration Signal Display..................................................................................... 238
● Service Functions..................................................................................................240
● Hardware Diagnostics...........................................................................................241
9.5.1 R&S Support Information
Access: [Setup] > "Service" > "R&S Support"
In case of errors you can store useful information for troubleshooting and send it to
your Rohde & Schwarz support center.
Service Functions