R&S FSPN - Selecting Items to Store

Remote Control
R&S
®
FSPN
456User Manual 1179.4363.02 ─ 01
Parameters:
<arg0> String containing the path of the directory to delete.
Note that the directory you want to remove must be empty.
11.8.2 Selecting Items to Store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(MMEMory:SELect[:ITEM]...), or only those from the currently selected channel
(MMEM:SELect:CHANnel[:ITEM]...) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL...........................................................................456
MMEMory:SELect[:ITEM]:ALL.........................................................................................456
MMEMory:SELect:CHANnel[:ITEM]:DEFault.....................................................................457
MMEMory:SELect[:ITEM]:DEFault................................................................................... 457
MMEMory:SELect:CHANnel[:ITEM]:HWSettings............................................................... 457
MMEMory:SELect[:ITEM]:HWSettings..............................................................................457
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL................................................................. 457
MMEMory:SELect[:ITEM]:LINes:ALL................................................................................457
MMEMory:SELect:CHANnel[:ITEM]:NONE....................................................................... 457
MMEMory:SELect[:ITEM]:NONE..................................................................................... 457
MMEMory:SELect:CHANnel[:ITEM]:SGRam.....................................................................458
MMEMory:SELect[:ITEM]:SGRam................................................................................... 458
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive].........................................................458
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive].............................................................458
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL....................................................... 458
MMEMory:SELect[:ITEM]:TRANsducer:ALL......................................................................458
MMEMory:SELect:CHANnel[:ITEM]:WEIGhting.................................................................459
MMEMory:SELect[:ITEM]:WEIGhting............................................................................... 459
MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL
This command includes all items when storing or loading a configuration file.
The items are:
●
Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL on page 457
●
Spectrogram data: MMEMory:SELect[:ITEM]:SGRam on page 458
●
Trace data: MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 458
Example:
MMEM:SEL:ALL
Manual operation: See " Items: " on page 192
Managing Settings and Results