R&S FSPN - System:communicate:gpib[:Self]:Address Identification String; GPIB Address; Identification String; Reset to Factory String

Network and Remote Operation
R&S
®
FSPN
283User Manual 1179.4363.02 ─ 01
GPIB Address............................................................................................................. 283
Identification String......................................................................................................283
Reset to Factory String............................................................................................... 283
Remote Display Update.............................................................................................. 284
GPIB Terminator..........................................................................................................284
*IDN Format................................................................................................................ 284
I/O Logging..................................................................................................................284
Display Remote Errors................................................................................................285
Set Hardware Immediately..........................................................................................285
GPIB Address
Defines the GPIB address. Values from 0 to 30 are allowed. The default address is 20.
Remote command:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess on page 493
Identification String
Defines the identification string for the R&S FSPN which is provided as a response to
the *IDN? query. Maximum 36 characters are allowed.
Remote command:
SYSTem:IDENtify[:STRing] on page 495
Reset to Factory String
Restores the default identification string. Each R&S FSPN has a unique ID according
to the following syntax:
Rohde&Schwarz,FSPN,<Unique number>
Network and Remote Control Settings