Remote Control
R&S
®
FSPN
516User Manual 1179.4363.02 ─ 01
STATus:QUEue[:NEXT]?
This command queries the most recent error queue entry and deletes it.
Positive error numbers indicate device-specific errors, negative error numbers are error
messages defined by SCPI. If the error queue is empty, the error number 0, "No error",
is returned.
This command is identical to the SYSTem:ERRor[:NEXT]? command.
Usage: Query only
11.10.2 Reading Out the CONDition Part
For more information on the condition part see Chapter 10.1.7.2, "Structure of a SCPI
Status Register", on page 265.
STATus:OPERation:CONDition?
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ACPLimit:CONDition? <ChannelName>
STATus:QUEStionable:EXTended:CONDition? <ChannelName>
STATus:QUEStionable:EXTended:INFO:CONDition? <ChannelName>
STATus:QUEStionable:FREQuency:CONDition? <ChannelName>
STATus:QUEStionable:LIMit<n>:CONDition? <ChannelName>
STATus:QUEStionable:LMARgin<n>:CONDition? <ChannelName>
STATus:QUEStionable:PNOise:CONDition? <ChannelName>
STATus:QUEStionable:POWer:CONDition? <ChannelName>
STATus:QUEStionable:POWer:DCPNoise:CONDition? <ChannelName>
STATus:QUEStionable:TEMPerature:CONDition? <ChannelName>
STATus:QUEStionable:TIME:CONDition? <ChannelName>
These commands read out the CONDition section of the status register.
The commands do not delete the contents of the CONDition section.
Suffix:
<n>
.
Window
Query parameters:
<ChannelName> String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Usage: Query only
11.10.3 Reading Out the EVENt Part
For more information on the event part see Chapter 10.1.7.2, "Structure of a SCPI Sta-
tus Register", on page 265.
STATus:OPERation[:EVENt]?
STATus:QUEStionable[:EVENt]?
Using the Status Register
To Next Page
Loading...
