Remote Control
R&S
®
FSPN
473User Manual 1179.4363.02 ─ 01
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
This command queries the name of the first available printer.
To query the name of other installed printers, use SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT] on page 473.
Manual operation: See " Printer Name " on page 203
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
This command queries the name of available printers.
You have to use SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt on page 473
for this command to work properly.
Manual operation:
See " Printer Name " on page 203
SYSTem:COMMunicate:PRINter:SELect<1|2> <arg0>
This command selects the printer that processes jobs sent by the R&S FSPN.
Use HCOPy:DESTination<1|2> to select another output destination.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> String containing the printer name.
Use
•SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 473and
•SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 473
to query all available printers.
*RST: NONE
Manual operation: See " Printer Name " on page 203
11.8.5 Saving Measurement Results
Useful commands to store measurement results described elsewhere:
●
FORMat[:DATA]
MMEMory:STORe<n>:TRACe.........................................................................................473
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command exports trace data from the specified window to an ASCII file.
Managing Settings and Results
To Next Page
Loading...
