Data Management
R&S
®
FSPN
203User Manual 1179.4363.02 ─ 01
Select Device 1/2
Selects the printing device to be configured.
Two different printout devices can be configured, for example one for printing and one
for storage to a file. When you execute the "Print immediately" function, the selected
printing device and its settings determine the behavior of the R&S FSPN.
Destination
Defines the medium to which the printout is output.
Destination: File ← Destination
Stores the printout to a file in the selected format. The filename is queried at the time of
storage, or a default name is used (see Suppress File Name Dialog ).
Multiple windows can only be printed to a file in PDF format. If you select an image file
format, the content setting is automatically set to Print Screenshot . Page settings are
not available for image files; however, you can configure the colors used for the
screenshot (see Chapter 8.4.1.5, "Print Color Settings", on page 206).
Remote command:
HCOPy:DEVice:LANGuage<1|2> on page 467
Destination: Clipboard ← Destination
Copies the printout to the clipboard. Since only single pages can be copied, only
screenshots can be copied to this destination, not multiple windows (see Chap-
ter 8.4.1.1, "Print Content Settings", on page 198). Page settings are not available;
however, you can configure the colors used for the screenshot (see Chapter 8.4.1.5,
"Print Color Settings", on page 206).
If you select the clipboard as the printing destination, the content setting is automati-
cally set to Print Screenshot .
Remote command:
HCOP:DEST1 'SYSTem:COMMunicate:CLIPboard'
Destination: Printer ← Destination
Sends the printout to the printer selected from the Printer Name list.
Remote command:
HCOP:DEST1 'SYSTem:COMMunicate:PRINter'
Suppress File Name Dialog
If the Destination is a file, the file selection dialog box is not displayed. Instead, the
default storage location and filename are used.
(C:\R_S\INSTR\USER\FSPN_ScreenShot_<date and time>).
Printer Name
Defines the printer to print to if a printer is selected as the Destination .
Any printers detected in the network are listed for selection.
Tip: the printout can also be stored in a print file using the selected printer driver, see "
Print to file " on page 204.
Creating Screenshots of Current Measurement Results and Settings
To Next Page
Loading...
