R&S FSPN - Service Functions

General Instrument Setup
R&S
®
FSPN
240User Manual 1179.4363.02 ─ 01
For more information on the calibration process, refer to the service manual.
Remote command:
DIAGnostic:SERVice:INPut[:SELect] on page 485
DIAGnostic:SERVice:INPut:SYNThtwo[:FREQuency] on page 485
9.5.4 Service Functions
Access: [Setup] > "Service" > "Service Function"
Using service functions
The service functions are not necessary for normal measurement operation. Incorrect
use can affect correct operation and/or data integrity of the R&S FSPN.
Therefore, only user accounts with administrator rights can use service functions and
many of the functions can only be used after entering a password. These functions are
described in the instrument service manual.
Service Function ........................................................................................................ 240
Send ...........................................................................................................................241
Numeric Mode ............................................................................................................241
Clear History .............................................................................................................. 241
Password ................................................................................................................... 241
Clear Results ..............................................................................................................241
Save Results ..............................................................................................................241
Result List .................................................................................................................. 241
Service Function
Selects the service function by its numeric code or textual name.
Service Functions