R&S FSPN - Fetch<N>[:Range<J>]:Pnoise<T>:Rpm; Mmemory:store<N>:Spurs; [Sense:]Bwidth:measurement

Remote Control
R&S
®
FSPN
332User Manual 1179.4363.02 ─ 01
FETCh<n>[:RANGe<j>]:PNOise<t>:RPM?
This command queries the residual PM.
Suffix:
<n>
.
Window
<j> Integration range
<t> Trace
Return values:
<Phase> <numeric value>
Default unit: deg
Example: //Query residual PM
FETC:RANG2:PNO:RPM?
would return, e.g.
11.73
Usage: Query only
Manual operation: See "Integrated Measurements" on page 89
MMEMory:STORe<n>:SPURs <FileName>[, <Trace>]
This command exports the spur information to a file.
Suffix:
<n>
.
1..n
Window
Setting parameters:
<FileName> String containing the path and name of the target file.
<Trace> <numeric value> (integer only)
Trace from which the spur information is collected.
If you do not define a trace, all spurs over all traces are expor-
ted.
Example: //Store spur information of trace 1
MMEM:STOR:SPUR 'c:\spurs.asc',1
Usage: Setting only
[SENSe:]BWIDth:MEASurement?
This command queries the measurement bandwidth of the frequency stability mea-
surements (Allan variance and deviation).
Return values:
<Bandwidth> <numeric value>
Default unit: Hz
Measurements and Result Displays