R&S FSPN - Selecting Mode and Applications; Selecting the Operating Mode and Application

Remote Control
R&S
®
FSPN
316User Manual 1179.4363.02 ─ 01
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code.
Note: If you start a self-test remotely, then select the "Local" softkey while the test is
still running, the instrument only returns to the manual operation state after the test is
completed. In this case, the self-test cannot be aborted.
Return values:
<ErrorCode> integer > 0 (in decimal format)
An error occurred.
(For details, see the Service Manual supplied with the instru-
ment).
0
No errors occurred.
Usage: Query only
*WAI
Wait to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
*OPC).
Usage:
Event
11.4 Selecting the Operating Mode and Application
11.4.1 Selecting Mode and Applications
DISPlay:ATAB................................................................................................................317
INSTrument:CREate:DUPLicate...................................................................................... 317
INSTrument:CREate[:NEW]............................................................................................ 317
INSTrument:CREate:REPLace........................................................................................ 317
INSTrument:DELete....................................................................................................... 318
INSTrument:LIST?......................................................................................................... 318
INSTrument:REName.....................................................................................................318
INSTrument[:SELect]......................................................................................................319
Selecting the Operating Mode and Application