R&S FSPN - Configuring the Reference Frequency

Remote Control
R&S
®
FSPN
478User Manual 1179.4363.02 ─ 01
SYSTem:DATE <Year>, <Month>, <Day>
Configures the date on the instrument.
Parameters:
<Year>
<Month>
<Day>
Example:
SYST:DATE 2020,04,23
Manual operation: See " Set Date and Time " on page 217
SYSTem:TIME
<Year>, <Month>, <Day>
Configures the time on the internal real-time clock on the instrument.
Parameters:
<Hour> Range: 0 to 23
<Minutes> Range: 0 to 59
<Seconds> Range: 0 to 59
Example:
SYST:TIME 10,52,33
Manual operation: See " Set Date and Time " on page 217
11.9.2 Configuring the Reference Frequency
[SENSe:]ROSCillator:COUPling:BANDwidth..................................................................... 478
[SENSe:]ROSCillator:COUPling:BANDwidth:MODE.......................................................... 479
[SENSe:]ROSCillator:COUPling:MODE............................................................................479
[SENSe:]ROSCillator:LBWidth.........................................................................................479
[SENSe:]ROSCillator:O640.............................................................................................480
SOURce<si>:EXTernal<ext>:ROSCillator:EXTernal:FREQuency.........................................480
[SENSe:]ROSCillator:OSYNc.......................................................................................... 480
[SENSe:]ROSCillator:SOURce........................................................................................ 481
[SENSe:]ROSCillator:SOURce:EAUTo?........................................................................... 481
[SENSe:]ROSCillator:TRANge.........................................................................................482
[SENSe:]ROSCillator:EXTernal:FALLback........................................................................ 482
[SENSe:]ROSCillator:COUPling:BANDwidth <Bandwidth>
This command defines coupling bandwidth for the internal reference frequency.
Prerequisites for this command
●
Options R&S FSPN-B60 or -B61 must be available.
●
Select manual bandwidth mode ([SENSe:]ROSCillator:COUPling:
BANDwidth:MODE)
Configuring the R&S
FSPN