R&S FSPN - Page 467

Remote Control
R&S
®
FSPN
467User Manual 1179.4363.02 ─ 01
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
Example:
HCOP:DEV:COL ON
HCOPy:DEVice:LANGuage<1|2> <arg0>
This command selects the file format for a print job or to store a screenshot to a file.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> GDI | BMP | PNG | JPEG | JPG | DOC | PDF | SVG | RTF
GDI
Graphics Device Interface
Default format for output to a printer configured under Windows.
Must be selected for output to the printer interface.
Can be used for output to a file. The printer driver configured
under Windows is used to generate a printer-specific file format.
Example: To print a screenshot to a PNG file:
//Destination: PNG file
HCOP:DEV:LANG PNG
//Define file name
MMEM:NAME 'C:\R_S\instr\user\MeasurementTestReport.png'
//Print
HCOP:IMM
Manual operation: See "Destination: File " on page 203
HCOPy[:IMMediate<1|2>]
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME.
Suffix:
<1|2>
.
Printing device.
Manual operation: See " Print " on page 201
HCOPy[:IMMediate<1|2>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Managing Settings and Results