R&S FSPN - Page 466

Remote Control
R&S
®
FSPN
466User Manual 1179.4363.02 ─ 01
Suffix:
<1|2>
.
Printing device.
Parameters:
<arg0> 'MMEM'
Activates "Print to file". Thus, if the destination of the print func-
tion is set to "printer" (see HCOP:DEST1 'SYSTem:COMMuni
cate:PRINter' or HCOP:DEV:LANG GDI), the output is redir-
ected to a .PRN file using the selected printer driver.
Select the file name with MMEMory:NAME.
Note: To save a screenshot to a file, see HCOPy:DEVice:
LANGuage<1|2> on page 467.
'SYSTem:COMMunicate:PRINter'
Sends the hardcopy to a printer and deactivates "print to file".
Select the printer with SYSTem:COMMunicate:PRINter:
SELect<1|2> .
'SYSTem:COMMunicate:CLIPboard'
Sends the hardcopy to the clipboard.
*RST:
'SYST:COMM:CLIP'
Example: To print on a printer:
//Destination: printer, deactivate "print to file"
HCOP:DEST1 'SYSTem:COMMunicate:PRINter'
//Define the printer name
SYST:COMM:PRIN:SEL 'myFavoritePrinter'
//Print
HCOP:IMM
Example: To print to a *PRN file:
//Destination: printer
HCOP:DEV:LANG GDI
//Define the printer name
SYST:COMM:PRIN:SEL 'myFavoritePrinter'
//Redirect the printer output to a file
HCOP:DEST1 'MMEM'
//Define file name
MMEM:NAME 'C:\R_S\instr\user\MeasurementTestReport.png'
//Print
HCOP:IMM
Manual operation: See "Destination: Clipboard " on page 203
See "Destination: Printer " on page 203
See " Print to file " on page 204
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State> ON | OFF | 0 | 1
Managing Settings and Results