R&S FSPN - Page 454

Remote Control
R&S
®
FSPN
454User Manual 1179.4363.02 ─ 01
If you do not include a path for <NewFileName>, the command just renames the file.
Parameters:
<FileName> String containing the path and file name of the source file.
<FileName> String containing the path and name of the target file.
Example:
MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
MMEMory:MSIS <Device>
This command selects the default storage device used by all MMEMory commands.
Parameters:
<Device> 'A:' | 'C:' | … | 'Z:'
String containing the device drive name
*RST: n.a.
MMEMory:NAME
<FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with HCOPy[:IMMediate<1|2>].
Note that you have to route the printer output to a file.
Parameters:
<FileName> String containing the path and name of the target file.
Example:
MMEM:NAME 'C:\Data\PRINT1.BMP'
Selects the file name.
MMEMory:NETWork:DISConnect <Drive>[, <State>]
This command disconnects a network drive.
Parameters:
<Drive> String containing the drive name.
<State> 1 | 0 | ON | OFF
Optional: determines whether disconnection is forced or not
1 | ON
Disconnection is forced.
0 | OFF
Disconnect only if not in use.
*RST: 0
MMEMory:NETWork:MAP <FilePath>, <IP>[, <UserName>, <Password>, <State>]
This command maps a drive to a server or server directory of the network.
Managing Settings and Results