R&S FSPN - Page 458

Remote Control
R&S
®
FSPN
458User Manual 1179.4363.02 ─ 01
●
Hardware configuration: MMEMory:SELect[:ITEM]:HWSettings on page 457
●
Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL on page 457
●
Spectrogram data: MMEMory:SELect[:ITEM]:SGRam on page 458
●
Trace data: MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 458
Example:
MMEM:SEL:NONE
Manual operation: See " Items: " on page 192
MMEMory:SELect:CHANnel[:ITEM]:SGRam
<State>
MMEMory:SELect[:ITEM]:SGRam <State>
This command includes or excludes spectrogram data when storing or loading a con-
figuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:SGR ON
Adds the spectrogram data to the list of data subsets.
Manual operation: See " Items: " on page 192
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive] <State>
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive] <State>
This command includes or excludes trace data when storing or loading a configuration
file.
Suffix:
<1...3>
.
irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0, i.e. no traces are stored
Example:
MMEM:SEL:TRAC ON
Manual operation: See " Items: " on page 192
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL <State>
MMEMory:SELect[:ITEM]:TRANsducer:ALL <State>
This command includes or excludes transducer factors when storing or loading a con-
figuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:TRAN:ALL ON
Managing Settings and Results