5-20 srellortnoC evirD 30EVIRDOCE610-3.**CKD 30EVIRDOCE
Note:
• Exceeding allowed control voltage generates error message "+24 volt
error". (=> See also functional rmware description.)
• Control voltage failure causes the running motor to coast torque-free
(without brake).
DANGER
Dangerous movements due to unbraked
coasting of motor with control voltage failure!
 Personnel should not remain within the area of the
machine with moving parts. Possible preventive
steps against unauthorized access are:
– protective fencing
– bars
– covers
– light barriers
 The fences must be able to withstand the maximum
possible force that the machine can generate.
customerservice@hyperdynesystems.com | (479) 422-0390
To Next Page
Loading...
Need help?
General
