Rexroth Indramat ECODRIVE03 Series User Manual

4-86 ECODRIVE03 DKC**.040, DKC**.100, DKC**.200 ECODRIVE03 Drive Controllers
X10, EcoX Expansion interface
Note: EcoX allows:
• synchronizing drives and I/O modules
• connecting up to 2 modules with 16 digital inputs and
outputs each per drive controller
• transmitting a command value from one drive controller to
a maximum of three other drive controllers
Technical description of connector
Ap5268f1.FH7
123
456
Fig. 4-133: Connector X10
Type No. of pins Design
Spring contact 2 x 3 Bushing on connector
Fig. 4-134: Design
Cross section
single wire
[mm ²]
Cross section
multi core wire
[mm ²]
Cross section
in AWG
gauge no.:
0.2-2.5 0.2-1.5 24-16
Fig. 4-135: Connection cross section
Expansion interface
AP5376F1.FH7
device external device internal
X10
1
2
3
4
5
6
IAN+
0V
IAN-
IAN+
IAN-
0V
IAN+
IAN-
Fig. 4-136: Expansion interface
Illustration:
Design:
Connection cross section:
Connection
Expansion interface:
customerservice@hyperdynesystems.com | (479) 422-0390

Rexroth Indramat ECODRIVE03 Series Specifications

General

Brand	Rexroth Indramat
Model	ECODRIVE03 Series
Category	Controller
Language	English