5-10 srellortnoC evirD 30EVIRDOCE610-3.**CKD 30EVIRDOCE
Mains supply options
Single source supply
Characteristic for the single source supply is that the mains voltage is
applied to the DKC drive controller via individual mains connections.
Arranging the single source supply
Ap5401f1.fh7
K1
3
3
Fig. 5-10: Single source supply
Note: In addition to the illustrated connections of the drive controller
at the DC bus, the following connections must be wired as
well:
• Bb contact
• control voltage supply
customerservice@hyperdynesystems.com | (479) 422-0390
To Next Page
Loading...
