7-8 ECODRIVE03 Auxiliary Capacitance Module CZM01.3 ECODRIVE03 Drive Controllers
XE1, Protective conductor connection for mains
Technical description of connector
See page 7-5: "Front View".
Type No. of pins Design
gnir rof wercS1wercs
terminals M5
Fig. 7-14: Design
min. tightening torque
[Nm]
max. tightening torque
[Nm]
0.35.2
Fig. 7-15: Tightening torque
Cross section
single wire
[mm ²]
Cross section
multi core wire
[mm ²]
Max. Cross section
in AWG
gauge no.:
--52--
Fig. 7-16: Connection cross section
Note: PE connection > 10 mm ²
Reason: high leakage currents (EN 50178/1998,
section: 5.3.2.1)
Illustration:
Design:
Tightening torque:
Connection cross section:
customerservice@hyperdynesystems.com | (479) 422-0390
To Next Page
Loading...
Need help?
General
