Rexroth Indramat ECODRIVE03 Series - X12, Optional Choke Connection for DKC**.3-200-7

ECODRIVE03 Drive Controllers ECODRIVE03 DKC**.040, DKC**.100, DKC**.200 4-93
X12, Optional Choke Connection for DKC**.3-200-7
Technical description of connector
Ap5294f1.FH7
Fig. 4-150: Connector X12
Type No. of pins Design
Screw-in connector 2 screw-in connection for
ring terminals M5
Fig. 4-151: Design
min. tightening torque
[Nm]
max. tightening torque
[Nm]
0.35.2
Fig. 4-152: Tightening torque
Cross section
single wire
[mm ²]
Cross section
multi core wire
[mm ²]
Cross section
in AWG
Gauge no.:
--52 - 01--
Fig. 4-153: Connection cross section
Connection Choke (DR+, DR-)
AP5295F1.FH7
choke connection
device-external device-internal
X12
DR+
DR-
1
2
Fig. 4-154: Optional choke connection for DKC**.3-200-7
At delivery: with bridges at: X12.1 to X12.2
V 009 CD:-L tsniaga egatlov .xam
egatlov sniam deilppAdnuorg tsniaga egatlov
A 07:)smr( tnerruc suounitnoc .xam
Illustration:
Design:
Tightening torque:
Connection cross section:
Connection
DR+, DR-:
Loadability of the connection
DR+, DR-:
customerservice@hyperdynesystems.com | (479) 422-0390