ECODRIVE03 Drive Controllers ECODRIVE03 DKC**.040, DKC**.100, DKC**.200 4-49
X2, Serial Interface
Note: Serial interfaces are generally used for programming,
parameterization and diagnoses upon commissioning and
during service. It can be operated either as RS232 or RS485.
Technical description of connector
Ap5265f1.FH7
1
8
9
15
Fig. 4-57: Connector X2
Type No. of pins Design
D-SUB 15 Bushings on unit
Fig. 4-58: Design
Cross section
single wire
[mm ²]
Cross section
multi core wire
[mm ²]
Cross section
in AWG
gauge no.:
-- 0.25-0.5 --
Fig. 4-59: Connection cross section
RS232 pin 2, 3
against each other
against 0 V
present
present
RS485 pin 4, 5
against each other
against 0 V
present
present
Fig. 4-60: Short circuit protection
Illustration:
Design:
Connection cross section:
Short circuit protection
customerservice@hyperdynesystems.com | (479) 422-0390
To Next Page
Loading...
Need help?
General
