Rexroth Indramat ECODRIVE03 Series User Manual

15-2 Replacing or Exchanging Drive Components ECODRIVE03 Drive Controllers
Pre- formed engine performance cable
1)
2)
2)
Pre- formed engine feedback cable
1)
_ _ _ _ _ _ _ - _ _ _ - _ _ _ _ _ _ / _ _ _ _
1. Pre- formed cables made by INDRAMAT (with connector) are identied with a
model label. The label provides the ordering information (IKS 103 for the Feedback
cable, for instance).
2. If cables are ordered without the connector, refer to the stamp on the cable
sheathing (Engine Feedback Cable IN 488, for instance).
AP5143F1.fh7
Barcode
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
H1
S1
S3
S2
Barcode Typenschild
123 4 5 6 7 8 9 1 2 3 4
11121314 151617 18
567 8
123 4 123 4 567 8
Specications for model label
DKC _._ - _ _ _ _ - _
S.No .: _ _ _ _ _ _
FWA-ECODR3 _-_ _ _-_ _VRS-MS
Hardware-
serialnumber
Software-
serialnumber
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
H1
S1
S3
S2
INDRAMAT - cable
IKG _ _ _
No.:
length: m
INDRAMAT - cable
IKS _ _ _
No.:
length: m
Fig. 15-1: Type designations of the drive components
customerservice@hyperdynesystems.com | (479) 422-0390

Rexroth Indramat ECODRIVE03 Series Specifications

General

Brand	Rexroth Indramat
Model	ECODRIVE03 Series
Category	Controller
Language	English