Rexroth Indramat ECODRIVE03 Series User Manual

ECODRIVE03 Drive Controllers ECODRIVE03 DKC**.040, DKC**.100, DKC**.200 4-5
WF-7-***-3.**CKDtinUlobmySnoitangiseD
Permissible ambient and air inlet
temperature for the output ratings
T
A
° 54+ ... 5+C
Max. permissible ambient and air
inlet temperature for reduced output
ratings
T
A
°C The values specied in the selection lists for
output and torque are reduced in the range
+45...+55 °C by 2% per °C temperature increase
Storage and shipping temperatures T
L
° 58+ ... 03-C
Max. allowed installation altitude for
the output ratings
0001m
0002medutitla noitallatsni dewolla .xaM
59%ytidimuh evitaler elbissimrep .xaM
Max. permissible absolute humidity g/m ³ 25
87105 NE ot gnidrocca ,2noitanimatnoc fo eerged elbawollA
ne dust no allowed, no condensation
)9891-925 ECI( 2991-1-0740 EDV NID = 92506 NE ot gnidrocca ,02PInoitcetorp fo epyT
Vibration sinus in operation according to EN 60068-2-6
zH 75 ... 5 ta )kaep-ot-kaep( mm 3.0ycneuqerF dna edutilpmA
2 g at 57 ... 500 Hz
51 ±%ecnareloT
Vibration distortion (Random) in operation according to IEC 68-2-36
005 ... 02zHycneuqerF
Spectral acceleration density
amplitude
g
2
10.0zH/
3 ±BdecnareloT
Virtual value (r.m.s.) of the total
acceleration
2.2g
Shock check not in operation according to EN 60068-2-27
sm 11 / g 51sixa 3 ni enis evlaH
Fig. 4-5: Ambient and operating conditions
Note: The user must check that the ambient conditions are
maintained, especially the control cabinet temperature, by
calculating the thermal performance of the control cabinet.
customerservice@hyperdynesystems.com | (479) 422-0390

Rexroth Indramat ECODRIVE03 Series Specifications

General

Brand	Rexroth Indramat
Model	ECODRIVE03 Series
Category	Controller
Language	English