Rigol DP2000 Series - System:tmode

:SYSTem:SYNC[:STATe]?
Description
Sets or queries the state of the on/off sync function.
Parameter
Name Type Range Default
<bool> Bool {0|1|ON|OFF} OFF
Remarks
• For CH1 and CH2, the on/off state of one channel will change accordingly when
that of the other is modified.
• The command is valid only when the tracking function ( :OUTPut:TRACk[:STATe] )
is enabled.
Return Format
The query returns 1 or 0.
Examples
:SYST:SYNC ON /*Enables the on/off sync function.*/
:SYST:SYNC? /*Queries the state of the on/off sync function. The
query returns 1.*/
4.11.20 :SYSTem:TMODe
Syntax
:SYSTem:TMODe < trackmode >
:SYSTem:TMODe?
Description
Sets or queries the on/off state of tracking function.
Parameter
Name Type Range Default
<trackmode> Discrete {SYNC|INDE} INDE
Remarks
The tracking function is available for the specified channels (CH1 and CH2). You can
select the track mode as required. This command functions the same
as :OUTPut:TRACk[:STATe] .
Command System
98
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.