Remarks
• The command is valid only when Manual IP is enabled
(
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
).
• The format of <gateway> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges
from 1 to 223 (except 127), and the other three range from 0 to 255.
• It is recommended that you acquire a valid gateway address from your network
administrator.
• After sending the command, you must
execute
:SYSTem:COMMunicate:LAN:APPLy
to apply the network parameters
currently set.
Return Format
The query returns the default gateway, for example, 172.16.3.1.
Examples
:SYST:COMM:LAN:GATE 172.16.3.1 /*Sets the default gateway to
172.16.3.1.*/
:SYST:COMM:LAN:GATE? /*Queries the current default gateway. The
query returns 172.16.3.1.*/
4.11.5.7 :SYSTem:COMMunicate:LAN:MAC?
Syntax
:SYSTem:COMMunicate:LAN:MAC?
Description
Queries the MAC address.
Parameter
None.
Remarks
The MAC (Media Access Control) address, also called the hardware address, is used
to define the location of the network device. For a power supply, the MAC address is
always unique, and is usually used to recognize the instrument when assigning IP
address to the instrument. The MAC address (48 bits, namely 6 bytes) is usually
expressed in hexadecimal form, for example, 00-2A-A0-AA-E0-56.
Return Format
The query returns the MAC address, for example, 00-2A-A0-AA-E0-56.
Command System
84
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
