Rigol DP2000 Series Programming Guide

Parameter
None.
Remarks
• Executes this command and the query returns a decimal value (corresponding to
the binary-weighted sum of all bits set in the register) and clear the status of the
register.
• The bits in the event register of the Questionable Status register are latched and
reading the register will clear it. You can also send
*CLS to clear the register.
Return Format
The query returns a decimal value, which corresponds to the binary-weighted sum of
the bits set in the event register of the Questionable Status register. For example, the
query may return +17.
Examples
:STAT:QUES? /*Queries the enable register of the Questionable
Status register. The query returns +17.*/
4.10.7 :STATus:QUEStionable:INSTrument:ENABle
Syntax
:STATus:QUEStionable:INSTrument:ENABle < enable value >
:STATus:QUEStionable:INSTrument:ENABle?
Description
Enables the bits in the enable register of the Questionable Status register.
Queries the enabled bits in the enable register of the Questionable Status register.
Parameter
Name Type Range Default
<enable value> Integer Refer to Remarks -
Remarks
• The <enable value> is a decimal value, which corresponds to the binary-
weighted sum of the bits to be enabled in the enable register of the
Questionable Status register.
• Enable the bits in the enable register of the Questionable Status register and the
system will report the state of the corresponding bit to the Status Byte register.
• When <enable value> is set to 0, executing this command will clear the enable
register of the Questionable Status register.
Command System
72
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Rigol DP2000 Series Specifications

General

Brand	Rigol
Model	DP2000 Series
Category	Power Supply
Language	English