Rigol DP2000 Series - Analyzer:state

Remarks
• Turn on the analyzer to store the waveform data collected in real time at the
current sample rate when the logger is enabled.
• Record at least 1 point to save the file.
• Turn off the analyzer to end the logging. The logged data is automatically saved
in the predefined path.
Return Format
The query returns 0 or 1.
Examples
:ANALyzer:SAVE:STATe 1 /*Turns on the logger*/
:ANALyzer:SAVE:STATe? /*Queries the on/off state of the logger. The
query returns 1.*/
4.1.6 :ANALyzer:STATe
Syntax
:ANALyzer:STATe < bool >
:ANALyzer:STATe?
Description
Sets or queries the run/stopped state of the analyzer.
Parameter
Name Type Range Default
<bool> Bool {0|1|ON|OFF} OFF
Remarks
None.
Return Format
The query returns 0 or 1.
Examples
:ANALyzer:STATe ON /*Turns on the analyzer.*/
:ANALyzer:STATe? /*Queries the on/off state of the analyzer. The
query returns 1.*/
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
17