Rigol DP2000 Series Programming Guide

• SYNC: Enables the track mode. For the two channels (from a single power
supply) that support this mode, changes made on one channel (including
voltage/current setting value, OVP/OCP level, and on/off status) is applied to the
other channel.
• INDE: Disables the track mode. For the two channels (from a single power
supply) that support this mode, changes made on one channel will not affect the
other.
Return Format
The query returns SYNCHRONOUS or INDEPENDENT.
Examples
:SYST:TMOD SYNC /*Enables the track mode.*/
:SYST:TMOD? /*Queries the on/off status of the track mode. The
query returns SYNCHRONOUS.*/
4.11.21 :SYSTem:TLOCk
Syntax
:SYSTem:TLOCk < bool >
:SYSTem:TLOCk?
Description
Locks or unlocks the touch screen; queries whether the touch screen is locked.
Parameter
Name Type Range Default
<bool> Bool {1|0|ON|OFF} 0
Remarks
The touch screen cannot be used.
Return Format
The query returns 1 or 0.
Examples
:SYSTem:TLOCk ON /*Locks the touch screen.*/
:SYSTem:TLOCk? /*Queries whether the touch screen is locked. The
query returns 1.*/
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
99

Rigol DP2000 Series Specifications

General

Voltage Resolution	1 mV
Current Resolution	1 mA
Type	Programmable DC Power Supply
Output Channels	1, 2
Output Voltage Range	0-30V
Current Accuracy	0.1% + 5mA
Ripple & Noise (CC)	≤3 mArms
Interface	USB, LAN
Display	4.3 inch LCD