Rigol DP2000 Series Programming Guide

Parameter
None.
Remarks
• The number of output groups refers to the number of preset voltage/current
groups in each cycle.
• The total number of groups in timing output = the number of output groups ×
repetition cycle; wherein, you can send
:TIMEr:CYCLEs to set the repetition cycle.
• The power supply terminates the timer function when the total number of
groups is complete. At this point, the state of the power supply is decided by the
setting in :TIMEr:ENDState .
Return Format
The query returns an integer between 1 and 512, for example, 25.
Examples
:TIME:GROUP:NUM? /*Queries the number of output groups. The query
returns 25.*/
4.12.5 TIMEr:GROUP:INDEx
Syntax
TIMEr:GROUP:INDEx < val >
TIMEr:GROUP:INDEx?
Description
Sets or queries the index number of the group currently edited in the Arb editor.
Parameter
Name Type Range Default
<val> Integer 1 to 512 -
Remarks
If there is no data inserted in the current row, it automatically goes to the last group
of data in the editor.
Return Format
The query returns the index number of the group currently edited, for example, 25.
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
103

Rigol DP2000 Series Specifications

General

Brand	Rigol
Model	DP2000 Series
Category	Power Supply
Language	English