Rigol DP2000 Series - System Commands; System:beeper:immediate; System:beeper[:State]

4.11 :SYSTem Commands
:SYSTem commands are used to perform system setting, output setting, and interface
parameter setting.
4.11.1 :SYSTem:BEEPer:IMMediate
Syntax
:SYSTem:BEEPer:IMMediate
Description
Issues a single beep immediately.
Parameter
None.
Remarks
None.
Return Format
None.
Examples
None.
4.11.2 :SYSTem:BEEPer[:STATe]
Syntax
:SYSTem:BEEPer[:STATe] < bool >
:SYSTem:BEEPer[:STATe]?
Description
Sets or queries the on/off state of the beeper.
Parameter
Name Type Range Default
<bool> Bool {ON|OFF|1|0} OFF|0
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
77