Parameter
Name Type Range Default
<ip> ASCII string Refer to
Remarks
-
Remarks
• The command is valid only when Manual IP is enabled
(
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
).
• The format of <ip> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges from 1 to
223 (except 127), and the other three range from 0 to 255.
• It is recommended that you acquire a valid address from your network
administrator.
• After sending the command, execute
:SYSTem:COMMunicate:LAN:APPLy
to
apply the network parameters currently set.
Return Format
The query returns the IP address, for example, 172.16.3.128.
Examples
:SYST:COMM:LAN:DNS 172.16.3.128 /*Sets the IP address to
172.16.3.128.*/
:SYST:COMM:LAN:DNS? /*Queries the current IP address. The query
returns 172.16.3.128.*/
4.11.5.6 :SYSTem:COMMunicate:LAN:GATEway
Syntax
:SYSTem:COMMunicate:LAN:GATEway <
gateway
>
:SYSTem:COMMunicate:LAN:GATEway?
Description
Sets or queries the default gateway.
Parameter
Name Type Range Default
<gateway> ASCII string Refer to
Remarks
-
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
83
To Next Page
Loading...
Need help?
General
