Rigol DP2000 Series - Timer:templet:points

To Next Page

To Previous Page

Parameter

Name Type Range Default

<value> Real 0.001 s to 3600 s

Refer to

Remarks

• <value> specifies the duration of a cycle for a waveform. All waveforms except

for ExpRise and ExpFall require a period.

• By default, the period of Pulse is 2 s, and the period of other waveforms is 50 s.

• The total number of points within a period of the selected template is

determined by the period of the waveform and time interval

(

:TIMEr:TEMPlet:INTErval

). The number of points within a period=period/time

interval.

Return Format

The query returns a real number ranging from 0.001 to 3600, for example, 15.000.

Examples

:TIME:TEMP:PERI 15 /*Sets the Period to 15 s.*/

:TIME:TEMP:PERI? /*Queries the Period for the selected template.

The query returns 15.000.*/

4.12.18 :TIMEr:TEMPlet:POINTs

Syntax

:TIMEr:TEMPlet:POINTs <

value

:TIMEr:TEMPlet:POINTs?

Description

Sets or queries the total number of points.

Parameter

Name Type Range Default

<value> Integer 1 to 512 50

Command System

113

Other manuals for Rigol DP2000 Series