- Log in to the RIGOL official website (
www.rigol.com
), and click SERVICE
CENTRE > SERVICE > License Activation to enter the software license
registration interface.
- In the software license registration interface, input the correct key, serial
number (tap > Help > About to obtain the serial number of the
instrument), and verification code. Then click Generate to obtain the license
file download link. If you need to use the file, please click the link to
download the file to the root directory of the USB storage device.
• You can send
*OPT?
to query the installation of the specified option.
Return Format
None.
Examples
None.
4.6 :MEASure Commands
:MEASure commands are used to query the voltage, current, and power measured at
the output terminal of the specified channel.
4.6.1 :MEASure[:SCALar]:ALL[:DC]?
Syntax
:MEASure[:SCALar]:ALL[:DC]? [<
source
>]
Description
Queries the voltage, current, and power at the output terminal of the specified
channel.
Parameter
Name
Type Range Default
<source> Discrete {CH1|CH2|CH3|SERies|PARallel} -
Remarks
• SERies: Queries the total voltage, current, and power of the present series loop.
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
35
To Next Page
Loading...
Need help?
General
