Examples
:SYST:COMM:LAN:AUTO ON /*Enables the Auto IP mode.*/
:SYST:COMM:LAN:AUTO? /*Queries the on/off state of Auto IP. The
query returns 1.*/
4.11.5.3 :SYSTem:COMMunicate:LAN:DHCP[:STATe]
Syntax
:SYSTem:COMMunicate:LAN:DHCP[:STATe] <
bool
>
:SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Description
Sets or queries the on/off state of DHCP.
Parameter
Name Type Range Default
<bool> Bool {0|1|ON|OFF} ON|1
Remarks
• In DHCP mode, the DHCP server in the current network assigns network
parameters (such as the IP address) to the instrument.
• When all the three configuration modes are set to "On", the priority of
parameter configuration is "DHCP", "Auto IP", and "Manual IP".
• The three IP configuration modes cannot be set to "OFF" at the same time.
• After sending the command, execute
:SYSTem:COMMunicate:LAN:APPLy
to
apply the network parameters currently set.
Return Format
The query returns 1 or 0.
Examples
:SYST:COMM:LAN:DHCP ON /*Enables the DHCP mode.*/
:SYST:COMM:LAN:DHCP? /*Queries the on/off state of DHCP. The query
returns 1.*/
4.11.5.4 :SYSTem:COMMunicate:LAN:DNS
Syntax
:SYSTem:COMMunicate:LAN:DNS <
dns
>
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
81
To Next Page
Loading...
Need help?
General
