Remarks
• Repetition cycle refers to the number of cycles that the instrument performs
timing output according to the preset voltage and current values. You can set
the number of cycles to infinite (I) or a specified value (N,<value>).
• The total number of groups in timing output = the number of output groups ×
repetition cycle; wherein, you can send
:TIMEr:GROUPs:NUM?
to query the
number of output groups.
• The power supply terminates the timer function when the total number of
groups is complete. At this point, the state of the power supply is decided by the
setting in
:TIMEr:ENDState
.
Return Format
The query returns I or N,<value>, for example, N,20.
Examples
:TIME:CYCLE N,20 /*Sets the repetition cycle to 20.*/
:TIME:CYCLE? /*Queries the repetition cycle. The query returns
N,20.*/
4.12.2 :TIMEr:CHANNel
Syntax
:TIMEr:CHANNel <
ch
>
:TIMEr:CHANNel?
Description
Sets or queries the channel currently edited.
Parameter
Name Type Range Default
<ch> Discrete {CH1|CH2|CH3} -
Remarks
None.
Return Format
The query returns CH1, CH2, or CH3.
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
101
To Next Page
Loading...
Need help?
General
