Rigol DP2000 Series - System:communicate:lan; System:communicate:lan:apply

:SYSTem:COMMunicate:GPIB[:RDEVice]:ADDRess?
Description
Sets or queries the GPIB address.
Parameter
Name Type Range Default
<gpibaddress> Integer 0 to 30 2
Remarks
• Please install the optional GPIB interface before using it.
• Before using the GPIB interface, use a GPIB cable to connect the instrument and
PC, and then set the GPIB address.
Return Format
The query returns an integer, for example, 7.
Examples
:SYST:COMM:GPIB:ADDR 7 /*Sets the GPIB address.*/
:SYST:COMM:GPIB:ADDR? /*Queries the GPIB address. The query returns
7.*/
4.11.5 :SYSTem:COMMunicate:LAN
4.11.5.1 :SYSTem:COMMunicate:LAN:APPLy
Syntax
:SYSTem:COMMunicate:LAN:APPLy
Description
Applies the network parameters currently set.
Parameter
None.
Remarks
The new setting is valid only when this command is executed after the LAN
parameters are set.
Return Format
None.
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
79