Parameter
Name Type Range Default
<baud> Discrete
{9600|19200|38400|57600|
115200}
9600
Remarks
Connect the RS232 interface to your PC or data terminal equipment (DTE) using
RS232 cable and set the interface parameters (baud rate, parity bit, etc.) that match
the PC or terminal equipment.
Return Format
The query returns the baud rate, for example, 19200.
Examples
:SYST:COMM:RS232:BAUD 19200 /*Sets the baud rate of the RS232
interface to 19200.*/
:SYST:COMM:RS232:BAUD? /*Queries the baud rate of the RS232
interface. The query returns 19200.*/
4.11.7.2 :SYSTem:COMMunicate:RS232:DBIT
Syntax
:SYSTem:COMMunicate:RS232:DBIT <
databit
>
:SYSTem:COMMunicate:RS232:DBIT?
Description
Sets or queries the data bit of the RS232 interface.
Parameter
Name Type Range Default
<databit> Discrete {7|8} 8
Remarks
None.
Return Format
The query returns 7 or 8.
Examples
:SYST:COMM:RS232:DBIT 8 /*Sets the data bit of the RS232 interface
to 8.*/
:SYST:COMM:RS232:DBIT? /*Queries the data bit of the RS232
interface. The query returns 8.*/
Command System
88
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
