Rigol DP2000 Series - Output:ovp:ques

Remarks
• The overvoltage protection (OVP) function disables the output automatically
when the actual output voltage reaches the OVP level.
• If <source> is omitted, the command queries whether an OVP event occurred on
the current channel.
• You can send
:OUTPut:OVP:CLEar to clear the OVP event that occurred on the
specified channel.
Return Format
The query returns 1 or 0.
Examples
:OUTP:OVP:ALAR? CH1 /*Queries whether an OVP event occurred on
CH1.*/
4.8.10 :OUTPut:OVP:QUES?
Syntax
:OUTPut:OVP:QUES? [< source >]
Description
Queries whether an overvoltage protection (OVP) event occurred on the specified
channel.
Parameter
Name
Type Range Default
<source> Discrete {CH1|CH2|CH3} -
Remarks
• The overvoltage protection (OVP) function disables the output automatically
when the actual output voltage reaches the OVP level.
• If <source> is omitted, the command queries whether an OVP event occurred on
the current channel.
• You can send
:OUTPut:OVP:CLEar to clear the OVP event that occurred on the
specified channel.
Return Format
The query returns 1 or 0.
Examples
:OUTP:OVP:QUES? CH1 /*Queries whether an OVP event occurred on
CH1.*/
Command System
52
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.