Rigol DP2000 Series Programming Guide

4.10.3 :STATus:OPERation[:EVENt]?
Syntax
:STATus:OPERation[:EVENt]?
Description
Queries the value of the event register of the Operation Status register.
Parameter
None.
Remarks
Executes this command and the query returns a decimal value (corresponding to the
binary-weighted sum of all bits set in the register) and clear the status of the register.
Return Format
The query returns a decimal value, which corresponds to the binary-weighted sum of
the bits in the register. For example, the query might return +17.
Examples
:STAT:OPER? /*Queries the value of the event register of the
Operation Status register.*/
4.10.4 :STATus:PRESet
Syntax
:STATus:PRESet
Description
Sets the enable registers of the Questionable Status register to their power-on
defaults.
Parameter
None.
Remarks
None.
Return Format
None.
Examples
:STATus:PRESet /*Sets the enable registers of the Questionable
Status register to their power-on defaults.*/
Command System
70
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Rigol DP2000 Series Specifications

General

Brand	Rigol
Model	DP2000 Series
Category	Power Supply
Language	English