• You can also send
*SRE
(*SRE 0) and
*ESE
(*ESE 0) to clear the enable registers of
the Status Byte and Standard Event registers respectively.
Return Format
The query returns 0 or 1.
Examples
*PSC 1 /*Enables the function of clearing the enable registers of
the Status Byte and Standard Event registers at power-on.*/
*PSC? /*Queries the on/off state of the function of clearing the
registers at power-on. The query returns 1.*/
4.3.8 *RCL
Syntax
*RCL <
n
>
Description
Recalls a previously stored instrument state from the internal memory.
Parameter
Name
Type Range Default
<n> Discrete {0|1|2|3|4|5|6|7|8|9} -
Remarks
• This command recalls a previously stored state from the power supply’s
internal memory. Using number from 0 to 9 can recall the states named
RIGOL0.RSF~RIGOL9.RSF respectively.
• This command is valid only when a state file has been stored in the specified
storage location in the internal memory.
• You can also send
:MEMory[:STATe]:LOAD
to recall a previously stored instrument
state from the internal memory.
Return Format
None.
Examples
*RCL 5 /*Recalls the state file named RIGOL5.RSF stored in the
internal memory.*/
Command System
26
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
