Rigol DP2000 Series Programming Guide

Examples
:OUTPut:PAIR SERies /*Connects CH1 and CH2 in series (internal).*/
:OUTPut:PAIR? /*Queries the connection mode. The query returns
SERIES.*/
4.8.15 :OUTPut[:STATe]
Syntax
:OUTPut[:STATe] [< source >,]< bool >
:OUTPut[:STATe]? [<
source >]
Description
Sets or queries the on/off state for the specified channel.
Parameter
Name Type Range Default
<source> Discrete {CH1|CH2|CH3|ALL} -
<bool> Bool {0|1|ON|OFF} 0
Remarks
• Before enabling the channel output, please make sure that the current setting
will not affect the devices connected to the power supply.
• If <source> is omitted, the command executes the corresponding operation on
the current channel.
Return Format
The query returns 1 or 0.
Examples
:OUTP CH1,ON /*Enables the output for CH1.*/
:OUTP? CH1 /*Queries whether the CH1 output is enabled. The query
returns 1*/
4.8.16 :OUTPut:TRACk[:STATe]
Syntax
:OUTPut:TRACk[:STATe] < bool >
:OUTPut:TRACk[:STATe]?
Description
Sets or queries the on/off state of tracking function.
Command System
56
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Rigol DP2000 Series Specifications

General

Voltage Resolution	1 mV
Current Resolution	1 mA
Type	Programmable DC Power Supply
Output Channels	1, 2
Output Voltage Range	0-30V
Current Accuracy	0.1% + 5mA
Ripple & Noise (CC)	≤3 mArms
Interface	USB, LAN
Display	4.3 inch LCD