Rigol DP2000 Series Programming Guide

Return Format
The query returns 1 or 0.
Examples
:TIME:TEMP:INVE ON /*Enables the invert function for the template
currently selected.*/
:TIME:TEMP:INVE? /*Queries whether the invert function is enabled.
The query returns 1.*/
4.12.14 :TIMEr:TEMPlet:MAXValue
Syntax
:TIMEr:TEMPlet:MAXValue {< value >| MINimum | MAXimum }
:TIMEr:TEMPlet:MAXValue? [
MINimum | MAXimum ]
Description
Sets or queries the maximum voltage or current value of the selected template.
Parameter
Name Type Range Default
<value> Real
Voltage or current range of the
channel currently selected
1V/1A
Remarks
• When the object ( :TIMEr:TEMPlet:OBJect ) is set to Voltage (V), this command sets
the maximum voltage value; when the object is set to Current (C), this command
sets the maximum current value.
• When the selected template is Pulse, this command sets or queries the high
level.
• “MINimum” and “MAXimum” indicate the minimum and maximum current/
voltage available.
Return Format
The query returns the maximum voltage or current of the template currently selected,
for example, 5.000 or 5.3000.
Examples
:TIME:TEMP:OBJ V,2 /*Sets the object to voltage and the current
value to 2 A.*/
:TIME:TEMP:MAXV 5 /*Sets the maximum voltage to 5 V for the
selected template.*/
:TIME:TEMP:MAXV? /*Queries the maximum voltage value for the
template currently selected. The query returns 5.000.*/
Command System
110
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Rigol DP2000 Series Specifications

General

Voltage Resolution	1 mV
Current Resolution	1 mA
Type	Programmable DC Power Supply
Output Channels	1, 2
Output Voltage Range	0-30V
Current Accuracy	0.1% + 5mA
Ripple & Noise (CC)	≤3 mArms
Interface	USB, LAN
Display	4.3 inch LCD