Rigol DP2000 Series Programming Guide

Examples
None.
4.11.5.8 :SYSTem:COMMunicate:LAN:MANualip[:STATe]
Syntax
:SYSTem:COMMunicate:LAN:MANualip[:STATe] < bool >
:SYSTem:COMMunicate:LAN:MANualip[:STATe]?
Description
Sets or queries the on/off state of Manual IP.
Parameter
Name Type Range Default
<bool> Bool {0|1|ON|OFF} 0
Remarks
• In Manual IP mode, you can define the network parameters (such as the IP
address).
• When all the three configuration modes are set to "ON", the priority of
parameter configuration is "DHCP", "Auto IP", and "Manual IP". Therefore, to
use the Manual IP configuration mode, “DHCP
( :SYSTem:COMMunicate:LAN:DHCP[:STATe] )” and “Auto IP
( :SYSTem:COMMunicate:LAN:AUTOip[:STATe] )” should be set to “OFF”.
• The three IP configuration modes cannot be set to "OFF" at the same time.
• After sending the command, execute :SYSTem:COMMunicate:LAN:APPLy to
apply the network parameters currently set.
Return Format
The query returns 1 or 0.
Examples
:SYST:COMM:LAN:MAN ON /*Enables the Manual IP mode.*/
:SYST:COMM:LAN:MAN? /*Queries the on/off state of Manual IP. The
query returns 1.*/
Command System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
85

Rigol DP2000 Series Specifications

General

Brand	Rigol
Model	DP2000 Series
Category	Power Supply
Language	English